TV & Monitor Mounts

At a Glance

The M300 is a one-stud solution for those looking to enjoy a wide range of TV viewing angles without taking up too much wall space. For medium-sized TVs, this versatile mount has heavy-duty steel arms that support up to 80 pounds and allow for easy tilt, pan and swivel adjustments.

At a Glance

The PT300 is a dual-stud, tilting wall mount designed to support TVs up to 90 inches. Its pre-tensioned mounting brackets provide 12° of forward tilt, helping to reduce glare and improve line-of-sight with your TV. Each bracket is equipped with a horizontal leveling screw to facilitate precision leveling, a Torx screw and locking feature to protect against theft, and a quick-release cord for easy removal of your TV.

At a Glance

Don’t let the size of your TV dictate where you put it. Capable of supporting TVs up to 100”, the PMX700 features two articulating arms that can be horizontally offset to give you the utmost discretion over where your TV is placed. With 31.3” of extension, this full motion wall mount provides enough tilt and swivel movement to ensure you always have the perfect viewing angle.

At a Glance

The PT400 is a low-profile, tilting wall mount designed to improve line-of-sight with your TV. Its pre-tensioned mounting brackets provide 12° of forward tilt and come equipped with adjustable screws to facilitate precision leveling.

At a Glance

Meet PDX680, the standard in full motion mounts from Kanto. Sitting a mere 2” from the wall and extending up to 24”, the PDX680 is the perfect solution for versatility.

At a Glance

It will hold TVs weighing up to 88 pounds, and offers extension, tilt and swivel capabilities to provide you with a wide range of viewing positions, yet sit close to the wall when pushed back.

At a Glance

The M600 full motion TV mount features a narrow wall plate intended for single-stud, brick and concrete installations.

At a Glance

When mounting your TV to the wall isn’t an option, the TTS100 tabletop stand provides the next best solution. Designed to sit on top of an entertainment center, this mount and base combo serves as an improvement to the basic stand included with most TVs.

At a Glance

Watch TV outside with peace of mind as you enjoy everything the Kanto PS400SG outdoor TV wall mount offers. This single stud wall mount provides a streamlined installation of TVs weighing up to 88 lbs in areas with limited wall space.

At a Glance

Mount your TV in the harshest of environments with the PDX650SG. This class-leading full-motion outdoor TV mount offers fully articulating, stainless steel arms that let you watch your large TV weighing up to 125 lbs from any angle.

At a Glance

The TE300 extendable tilting TV mount offers the simplicity of a tilt mount with none of the drawbacks. TE300 eliminates the need to plan cabling in advance by pulling away from the wall up to 6” providing easy access to the back of your TV.

At a Glance

F6080 allows you to securely mount the largest TV panels available, supporting up to 200 lbs and accommodating a generous 1100×600 VESA. With just 1.1" between the wall and the back of the TV, you can achieve a sleek, low-profile look even with the heaviest TVs.

At a Glance

The CM600B4B Quad TV Ceiling Mount is the perfect solution for AV installations requiring multiple screens. Supporting panels up to 45”, CM600B4B allows you to mount four displays in a back-to-back configuration with two facing each direction. The pivoting ceiling plate offers flexibility to attach to flat, angled, or vertical surfaces.

At a Glance

The CM600BTB Dual TV Ceiling Mount is the ideal solution for retail or commercial AV setups. This versatile mount features back-to-back TV plates, allowing you to mount two panels in opposite directions. The pivoting mounting plate offers flexibility to mount onto flat, angled, or vertical surfaces.

At a Glance

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that.

At a Glance

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS2000 is designed to do exactly that.

At a Glance

Put down the drill and securely strap your TV directly to a column or pillar. PSC350 pillar TV mount features fabric straps instead of mechanical fasteners for a non-permanent installation that can quickly be removed with no damage. A full-motion articulating arm provides swivel and extension in places where traditional TV wall mounts cannot be used.

At a Glance

The Kanto SDX600 full motion TV mount features anti-theft TV arms and screws that make TV removal difficult without the included tool. The anti-theft tilt mechanism also helps prevent unauthorized tilt setting changes.

At a Glance

Improve your TV viewing experience with the FMX3 full motion wall mount. Offering 28 inches of extension, the FMX3’s heavy-duty articulating arms allow you to pan, swivel and tilt your TV to achieve the best view from wherever you’re seated.

At a Glance

The LX600SW wall mount ensures a hassle-free and secure installation for TVs weighing up to 100 pounds into steel studs. Its dual articulating arms extend 17 inches in order to pan and swivel your TV for angled viewing and sit 2.2 inches from the wall when fully retracted.

At a Glance

MTM86PL lets you safely deploy even the largest of TVs or interactive panels from room to room for easy sharing of AV resources across your business. This AV cart’s UL certification provides peace of mind when team members are maneuvering the cart.

At a Glance

Designed specifically for video conferencing, the MPC77 rolling TV stand comes with everything you need to deploy a mobile conferencing solution. From a device tray that integrates with meeting room touch controllers to a shelf specifically designed for all-in-one conferencing devices, this mobile media cart seamlessly integrates with your gear while keeping you organized with cable management and mounting points.

At a Glance

Elevate your large screen experience with the TTS140 adjustable tabletop TV stand. This tabletop TV mount surpasses the included TV legs stands by accommodating screens up to 125 lbs while providing additional features.

At a Glance

The Kanto DTS1000 universal height adjustable desktop monitorstand is a companion to your monitor that improves ergonomics forincreased productivity. This monitor stand is easy to deploy with itsdetachable monitor plate and offers easy height adjustment, swivel,tilt, and monitor rotation. Switch between portrait and landscapeorientation with ease thanks to the 360° rotation.